The Aussie Pumps Honda 5.5HP Petrol Fire Chief is a powerful and versatile pump that can be used for a variety of applications, including irrigation. This blog will walk you through the steps on how to set up the pump for irrigation so that you can start watering your crops right away.
Table of Contents
Step 1: Inspect the Pump
Before you start setting up the pump, it is important to inspect it for any damage. Make sure that the pump is not leaking and that all of the components are in good working order.
Step 2:
Fill the unit with oil. Please used the recommend SAE30 oil (the same as what you would use in your lawn mower. Only fill the unit to the bottom of the dip stick. Too much and the pump will not start. You will also need to add unleaded petrol.
Step 3: Attach the Suction Hose
The suction hose is used to draw water from your irrigation system into the pump. The hose should be attached to the inlet port on the pump. Make sure that the hose is properly sealed to prevent leaks. It is also recommended to have a foot valve, but this is not compulsory.
Step 4: Attach the Discharge Hose
The discharge hose is used to deliver water from the pump to your irrigation system. The hose should be attached to the outlet port on the pump. Make sure that the hose is properly sealed to prevent leaks.
Step 5: Prime the Pump
Before the pump can be used, it must be primed. Priming the pump ensures that there are no air pockets in the pump, which would prevent water from flowing through the pump. To prime the pump, fill the suction hose with water.
The pump should now be primed and ready to use.
Step 6: Start the Engine
The engine on the Fire Chief is started with a recoil starter.
Pull the recoil starter rope until the engine starts.
Allow the engine to warm up for a few minutes before using the pump.
Step 7: Use the Pump
Once the pump is primed and the engine is started, you can use the pump to irrigate your crops. To do this, simply open the discharge valve and direct the water flow to your irrigation system.
Safety Precautions
When using Fire Chief for irrigation, it is important to follow these safety precautions:
Always wear safety glasses when operating the pump.
Keep the pump away from children and pets.
Do not operate the pump in wet or icy conditions.
Do not overload the pump.
Be aware of the pump’s discharge pressure and do not direct the water flow at people or animals.
Conclusion
Setting up the Petrol Fire Chief for use is a relatively simple process. By following the steps in this blog, you can have the pump up and running in no time. With its powerful engine and versatile design, the Aussie Pumps Honda 5.5HP Petrol Fire Chief is a valuable tool.
Additional Tips
For best performance, try to use clean, clear water in the pump.
If the pump is not used for an extended period of time, it is a good idea to drain the water from the pump and store it in a dry place.
The pump should be serviced regularly by a qualified technician to ensure that it is in good working order.
